The ESP32-C5 is Espressif’s first ESP32 with dual-band 2.4 GHz + 5 GHz Wi-Fi 6, while also providing Bluetooth LE and 802.15.4 for Zigbee and Thread. It combines a 240 MHz RISC-V main processor, a 48 MHz low-power RISC-V processor,…
If you work with ESP32 boards, Arduino modules, sensors, small PCBs or Home Assistant DIY electronics, there comes a point where a normal soldering iron is not enough. A soldering iron is fine for pin headers, wires and simple connectors.…
Affiliate disclosure: This article contains AliExpress affiliate links. If you buy through them, esp32.co.uk may earn a small commission at no extra cost to you. This is not a paid advertisement and the product has not been supplied by the…
ESP32-C5 DevKitC-1 v1.2 pinout diagram with header tables, safe GPIOs, strapping pins, USB, UART, ADC, RGB LED and revision notes.
The LD2410 is one of the most useful sensors you can connect to an ESP32 for Home Assistant. It is a 24GHz mmWave presence sensor, which means it can detect small human movement and stationary presence much better than a…
An ESP32 AC climate controller is one of the best upgrades you can make to an ordinary infrared-controlled air conditioner. Instead of using the original remote control every time, you can let Home Assistant turn the AC on, change the…
Connect an IR receiver to ESP32, learn remote codes in ESPHome and use them in Home Assistant. Includes wiring, YAML, protocols and fixes.
M5Paper Color review: 4-inch 400×600 Spectra 6 colour e-paper, ESP32-S3, battery and Home Assistant uses—plus the key 15–30s refresh limitation.
Home Assistant Yellow is the official expandable smart home hub designed for people who want more flexibility than Home Assistant Green. It runs Home Assistant locally, supports Raspberry Pi Compute Module hardware, includes built-in Zigbee and Thread-capable radio hardware, and…