This project shows how to do a simple LoRa “Hello World” send & receive test using two TTGO LoRa32 (SX1276) boards with built-in 0.96″ SSD1306 OLED displays. We’ll configure one board as a sender, which sends a counter every second,…
This guide focuses on pinout and GPIO selection for the DevKitC-1, so you can safely connect sensors, relays, USB, displays etc. without running into weird boot issues. The ESP32-S3-DevKitC-1 is Espressif’s entry-level development board for the ESP32-S3-WROOM-1 / 1U /…
The ESP32-S2-DevKitC-1 is Espressif’s entry-level development board for the ESP32-S2 – a single-core Wi-Fi microcontroller with native USB, 43 GPIOs, ADC, DAC, touch, and a rich set of peripherals. This guide focuses on pinout and GPIO selection for the DevKitC-1,…
1. ESP32 DevKit / ESP-WROOM-32 Overview The ESP32-WROOM-32 module exposes up to 32 GPIO pins, plus power, enable and boot configuration pins. These GPIOs are highly multiplexed: the same pin can often be used as digital I/O, ADC, touch, I²C,…
A wall-mounted ESP32 room controller with a small display and a few buttons can replace several physical thermostats and remotes: This guide shows how to build an ESP32-based room controller with: 1. Hardware Required 2. Suggested Pinout Buttons are wired:…
This guide explains: Most ESP32 projects are powered from USB adapters and run 24 battery-powered sensors, that approach kills the battery in a few hours. To build long-lasting wireless sensors (temperature, humidity, leak, motion, etc.) running on 18650 cells or…
An ESP32 can easily replace five separate smart sensors with a single multi-sensor node that sends everything to Home Assistant: All fully local, no cloud, and powered from a single USB supply. This guide shows how to build an all-in-one…
Water leak sensors can prevent serious damage from leaking pipes, washing machines, dishwashers, boilers, and under-sink plumbing.With an ESP32 and a simple water leak probe, it is easy to build a low-cost, fast, and fully local leak detection system that…
A motion sensor that only turns lights on when it’s dark is one of the most useful smart home automations.By combining a PIR motion sensor with a simple LDR (light-dependent resistor) and an ESP32, it’s easy to build a local,…
Indoor air quality is not just about CO₂. Volatile organic compounds (VOCs) from cleaning products, furniture, paints, cooking, and people can significantly affect comfort and health. The SGP40 is a modern VOC sensor designed specifically for indoor air quality applications,…
Combining a PIR motion sensor with an LDR light sensor is one of the most flexible ways to create intelligent room automation.With this setup, lights can automatically turn on only when the room is dark and motion is detected —…
Indoor air quality (IAQ) is influenced not only by CO₂ and humidity, but also by volatile organic compounds (VOCs) such as cooking fumes, cleaning chemicals, paints, perfumes, and off-gassing from furniture.The SGP40 is a high-quality VOC sensor from Sensirion that…
Sensirion’s SHT-series sensors are considered the gold standard in temperature and humidity sensing.They are used in industrial HVAC, medical devices, consumer electronics, environmental monitoring, and high-accuracy IoT projects. This article compares all SHT sensors, highlighting accuracy, stability, power consumption, differences,…
Bosch Sensortec is the leader in environmental sensing for IoT, and their BMP/BME sensors are used everywhere—from drones and weather stations to air-quality monitors and smart-home automation.Although many modules look identical, each generation offers different capabilities, accuracy improvements, and target…
ESP32 versions fall into 5 main families: the original ESP32 (Wi-Fi + Bluetooth Classic), S2/S3 (USB, higher performance), C2/C3/C5/C6 (RISC-V, cheap; C6 adds Wi-Fi 6 + Thread/Zigbee), H2 (Thread/Zigbee only, no Wi-Fi), and P4 (high-performance compute, no Wi-Fi).This guide compares…
