Quick Summary (TL;DR):
Before buying HDDs or SSDs for a NASPriceAliExpress price, check the exact NASAliExpress price model, exact drive part number, interface, firmware and intended use. A drive can be electrically compatible with SATA or M.2 and still be unsupported for storage pools, SSD cache, health monitoring or vendor support. Current policies differ sharply by vendor. UGREEN NASync is the most open of the three: UGREEN explicitly supports a broad third-party drive ecosystem and tells buyers to verify the exact drive part number in its compatibility list; an unlisted drive may still be detected, but UGREEN says its stability/performance has not been verified. QNAP also supports many third-party drives, but its compatibility database is model-specific and QNAP states that customer service cannot provide technical support for devices not on the list. Synology changed policy again with DSM 7.3: 2025 desktop DiskStation Plus models can create storage pools using non-validated third-party HDDs and 2.5-inch SATA SSDs, but drives on the incompatibility list remain blocked and M.2 NVMe support is much stricter. On current 25-series Plus models such as DS925+, Synology requires verified M.2 SSDs for M.2 storage pools. The safest buying process is therefore: choose the NASAliExpress price first, open that exact model’s current compatibility page, copy the complete HDD/SSD model number, check firmware/sector format/capacity, and only then compare prices.
NAS Drive Compatibility Is More Than SATA vs NVMe
Physically fitting a drive does not guarantee that the NAS vendor supports every feature.
Compatibility can affect:
- Whether the NAS detects the drive.
- Whether a new storage pool can be created.
- Whether the drive can join an existing RAID.
- SMART and health monitoring.
- Drive temperature reporting.
- Firmware updates through the NAS.
- SSD cache creation.
- M.2 storage-pool creation.
- Vendor technical support.
- Warnings shown in the storage manager.
That is why “it is a SATA drive, so it will work” is not a sufficient buying check.
Compatibility Checklist Before Buying Any NAS Drive
- Exact NAS model: DS925+, DXP4800 PlusPrice, TS-464Price—not just the brand.
- Exact drive model number: ST12000VN0008, WD120EFGX, etc.
- Drive type: 3.5-inch SATA HDD, 2.5-inch SATA SSD, M.2 NVMe SSD, U.2 NVMe, SAS.
- Capacity: verify that the NAS and firmware support that drive size.
- Sector format: 512e vs 4Kn where relevant.
- Firmware: check whether a particular firmware revision is listed or required.
- Intended role: storage pool, read cache, read-write cache, boot/app pool.
- Vendor status: compatible, unverified/unlisted, or explicitly incompatible.
Exact Model Number Matters More Than Product Family
A retailer may list a drive simply as “WD Red Plus 12TB” or “Seagate IronWolf 8TB”.
That is not precise enough.
Different models inside the same family/capacity can use different:
- Controllers.
- Firmware.
- Platter designs.
- Power profiles.
- Sector formats.
- Performance characteristics.
QNAP explicitly notes that manufacturers can revise ICs, PCBs and layouts within product lines and that those changes can affect compatibility.
Our drive-family guide explains why the exact SKU matters even before compatibility is considered: WD Red Plus vs WD Red Pro vs Seagate IronWolf for Home NAS.
Synology Compatibility Policy in DSM 7.3
Synology’s policy changed materially with DSM 7.3.
When Synology first introduced the 2025 Plus-series policy, new Plus models were positioned around Synology drives and third-party drives validated to Synology specifications.
DSM 7.3 subsequently restored more flexibility for current consumer/desktop models.
2025 Desktop Plus Models Can Use Unlisted HDDs under DSM 7.3
Current Synology DSM 7.3 policy states that 2025 desktop DiskStation Plus models can use HDDs that are not on the compatibility list for:
- New installation.
- Storage-pool creation.
- Migration from an existing Synology system.
The same current policy also allows unlisted 2.5-inch SATA SSDs for new storage pools/cache/migration on these desktop Plus models, subject to DSM’s normal drive-type requirements.
That is a major improvement compared with the original 2025 launch policy.
“Unlisted” and “Incompatible” Are Not the Same on Synology
This distinction is critical.
An unlisted/not validated drive has not been verified by Synology for that model.
An incompatible drive is explicitly placed on Synology’s incompatibility list.
Current DSM 7.3 policy for 2025 desktop Plus systems allows many unlisted SATA drives, but drives on the incompatibility list are not supported for storage-pool creation, cache or migration.
Synology Support Is Better with Verified Drives
Synology’s compatibility pages state that third-party drives on the list have been tested and verified.
For a drive that is not on the compatibility list, Synology can provide support for the NAS hardware/software/configuration but may limit support for problems caused by the drive or its firmware.
So a non-listed HDD may work perfectly while still carrying a support trade-off.
Synology M.2 NVMe Is Much More Restricted
Do not assume DSM 7.3’s relaxed HDD policy also applies to M.2 NVMe.
Current Synology policy remains much stricter for M.2 SSDs because cache/storage-pool workloads can create sustained random I/O, high write endurance demands and thermal stress.
For 2025 desktop Plus models, non-listed M.2 NVMe SSDs are not supported for new M.2 storage-pool creation or cache creation under the current policy.
DS925+ M.2 Storage Pools Require Verified SSDs
The current DS925+ specification states that creating an M.2 storage pool requires Synology-verified SSDs.
Synology’s current M.2 storage-pool support page lists models such as:
- DS425+.
- DS725+.
- DS925+.
- DS1525+.
- DS1825+.
and instructs users to install compatible Synology M.2 SSDs for those storage pools.
This is why our NVMe buying guide repeatedly says compatibility first: Best NVMe SSDs for NAS Cache and Containers.
Synology 4Kn Drives Need Special Attention
Synology’s compatibility list warns that 4K-native (4Kn) drives must be used and managed separately from non-4Kn drives.
Do not buy a 4Kn enterprise drive without checking whether:
- Your exact NAS model supports it.
- Your intended RAID/pool can use it.
- Existing members use the same sector format.
512e and 4Kn look like ordinary SATA drives in a retailer listing but can have important pool-design implications.
Enterprise Synology Models Still Have Stricter Policies
Do not take the relaxed desktop Plus policy and apply it to every Synology product.
Current DSM 7.3 compatibility rules remain stricter for ranges such as:
- FS.
- HD.
- SA.
- UC.
- XS/XS+.
- DVA/NVR.
Those systems can restrict new storage-pool creation with non-listed drives even when a desktop Plus model would accept them.
UGREEN: The Most Open Drive Ecosystem of the Three
UGREEN explicitly promotes NASync as an open storage ecosystem with extensive third-party drive support.
Current product pages state compatibility with third-party drives from major brands including:
- Western Digital.
- Seagate.
- Toshiba.
There is no requirement to buy UGREEN-branded HDDs because UGREEN does not operate the same proprietary HDD ecosystem as Synology.
UGREEN Still Has a Compatibility List
Open does not mean untested.
UGREEN tells users to select:
- The exact NASync model.
- The exact drive category.
- The complete manufacturer part number.
Its current guidance says an unlisted drive may still be detected, but UGREEN has not verified its stability or performance with that NAS model.
For important primary storage, use a tested drive where possible.
UGREEN Recommends NAS-Rated CMR HDDs
UGREEN’s current guidance recommends mainstream NAS CMR families such as:
- WD Red Plus.
- WD Red Pro.
- Seagate IronWolf.
- Seagate IronWolf Pro.
- Toshiba N300.
That does not mean every capacity/model in those families is automatically on every NASync model’s tested list. Check the full model number.
UGREEN M.2 SSDs Can Be Cache or Storage on Supported Models
Current NASync models such as DXP4800 and DXP4800 Plus include two M.2 NVMe slots.
UGREEN’s current product pages describe those M.2 drives as usable for:
- SSD caching.
- Additional high-speed storage.
This is materially more flexible than the strict M.2 storage-pool policy on current Synology Plus systems.
Even so, check the compatibility list and maximum supported M.2 capacity for the exact NASync model.
UGREEN Capacity Limits Vary by Model
Do not use the headline capacity of one NASync model as a universal limit.
For example, UGREEN’s current DXP4800 page lists:
- Four SATA bays.
- Up to 24TB per SATA drive in its current published configuration.
- Two M.2 NVMe slots.
- Up to 8TB per M.2 SSD in the current published configuration.
Other NASync models differ. Always use the exact product specification that matches the enclosure you own.
QNAP: Broad Drive Choice but Strong Compatibility-List Language
QNAP supports a very broad range of third-party HDDs and SSDs, but it puts significant weight on its tested compatibility database.
QNAP says it tests drives for:
- Cold/warm starts.
- I/O stress.
- Thermals.
- SMART behaviour.
- Hot plugging.
- RAID rebuild behaviour.
That is much more meaningful than “the SATA connector fits”.
QNAP Says Support May Be Refused for Unlisted Devices
QNAP’s current compatibility page states that customer service is unable to provide technical support for devices not listed on its compatibility list.
For a home lab that may be an acceptable risk.
For a work/business NAS, this is a strong reason to stay within the tested list.
QNAP Drive Compatibility Can Change after Firmware/Hardware Revisions
QNAP notes that drive manufacturers sometimes change firmware or hardware during production.
A drive can therefore be removed from the compatibility list later if QNAP testing identifies stability problems.
Before ordering many disks, check the compatibility list immediately before purchase rather than relying on a forum post from two years ago.
QNAP Firmware Numbers Are Useful but Not Always Visible before Purchase
QNAP’s compatibility database may show tested firmware revisions.
But QNAP also notes that retail packaging often does not expose the drive firmware version.
QNAP’s recommendation is to select by the listed drive model and then update the drive firmware using the manufacturer’s utility where an update is available/appropriate.
Check QNAP’s “Not Recommended” List Too
QNAP maintains lists of devices it does not recommend on particular NAS models.
Do not assume that “not found on compatible list” and “explicitly not recommended” mean the same thing.
If a drive appears on a not-recommended/incompatible list, avoid it even if it is cheap.
HDD Compatibility Is Not the Same as SSD Cache Compatibility
A NAS can support a drive for normal storage without supporting it for every role.
Particularly for SSDs, check separately for:
- 2.5-inch SATA storage pool.
- 2.5-inch SATA cache.
- M.2 NVMe cache.
- M.2 NVMe storage pool.
- QM2/PCIe adapter use on QNAP.
Our cache/pool article explains the functional difference: NAS NVMe Cache vs SSD Storage Pool: Which Should You Use?.
Capacity Compatibility Is More Than the SATA Protocol
A SATA NAS may physically recognise a very large HDD while the vendor has not validated that capacity in the current firmware/model.
Check:
- Maximum per-drive capacity.
- Maximum storage-pool size.
- Maximum volume size.
- Expansion-unit limits.
- RAM requirements for very large volumes.
These are separate limits.
A Large Drive May Be Supported but a Huge Volume May Need More RAM
Synology’s current DS925+ specification, for example, notes that volumes over 108TB require 32GB or more system memory.
So a drive can be compatible while the planned total volume still runs into a separate system requirement.
Sector Format: 512e vs 4Kn
Enterprise HDDs may use native 4K sectors (4Kn) rather than 512-byte emulation (512e).
4Kn can be perfectly valid in a supported NAS, but it must be checked explicitly.
Do not mix sector formats in a storage pool unless the NAS vendor/documentation says the configuration is supported.
CMR vs SMR Is a Separate Compatibility Decision
A drive may be detected by the NAS but still be a poor RAID choice.
For normal NAS parity RAID we recommend documented CMR drives.
See CMR vs SMR for NAS: How to Choose the Right Hard Drive.
Vendor Compatibility Does Not Mean a Drive Is Ideal for Your Workload
A compatibility list answers:
Has this drive been tested/supported with this NAS?
It does not answer:
- Is it quiet enough for my living room?
- Does it have enough endurance for write cache?
- Is the £/TB good?
- Is it CMR?
- Does its warranty suit my use?
You still need a drive-selection decision after the compatibility check.
Compatibility Should Be Checked Again Immediately before Purchase
Drive lists change.
- NAS firmware changes.
- Drive firmware changes.
- Manufacturers revise hardware.
- Vendors add tested models.
- Vendors remove problematic models.
Do not treat a compatibility screenshot from last year as permanent documentation.
What “Unsupported” Usually Means
Unsupported can mean very different things depending on vendor/model.
| Status | Possible meaning |
|---|---|
| Compatible / verified | Vendor tested the exact model for this NAS/use |
| Unlisted / unverified | May work, but has not been validated; support may be limited |
| Incompatible / not recommended | Vendor identified a problem or blocks the configuration |
| Detected but unsupported for pool/cache | Hardware can see the SSD, but software will not allow the intended storage role |
This is why “someone on Reddit says it works” is not equivalent to vendor compatibility.
Should You Use an Unlisted Drive?
For a home media server, perhaps.
For irreplaceable family storage or work data, we would prefer a tested model unless there is a strong reason not to.
Consider:
- How important vendor support is.
- Whether the drive is explicitly incompatible or merely untested.
- Whether independent backups are strong.
- Whether SMART/health features work normally.
- Whether the price saving is meaningful.
Drive Health Monitoring Matters after Installation
Once the disks are installed:
- Run extended SMART tests.
- Check temperatures.
- Watch reallocated/pending sectors.
- Enable email/push health alerts.
- Schedule data/RAID scrubbing where appropriate.
- Investigate recurring I/O errors immediately.
Compatibility reduces risk, but it does not make a physical drive immortal.
A Good Buying Workflow
1. Choose exact NAS model
↓
2. Open vendor compatibility list
↓
3. Choose drive type/capacity
↓
4. Copy exact model number
↓
5. Check CMR / workload / warranty
↓
6. Check retailer listing matches exact SKU
↓
7. Check price
↓
8. Re-check compatibility immediately before ordering
This avoids buying first and discovering the restrictions later.
Synology vs UGREEN vs QNAP: Compatibility Philosophy
| Vendor | Current approach | Main caution |
|---|---|---|
| Synology | DSM 7.3 is more flexible for unlisted SATA HDD/2.5-inch SSD on current desktop Plus models | M.2 and enterprise-series policies remain stricter |
| UGREEN | Open third-party ecosystem; broad HDD/SSD support | Use exact compatibility list for validated stability/performance |
| QNAP | Broad third-party ecosystem with detailed model-specific testing | QNAP says unlisted devices may not receive technical support |
Which Vendor Is Easiest for Third-Party Drives?
UGREEN is currently the most straightforward if unrestricted third-party HDD/SSD choice is a major buying priority.
QNAP is also broad and open, but its support language strongly encourages staying within the tested database.
Synology’s DSM 7.3 changes have improved SATA-drive flexibility significantly on current desktop models, but M.2 storage-pool compatibility remains much more tightly controlled.
For the broader ecosystem decision, see Synology vs QNAP vs UGREEN vs TerraMaster: Which NAS Should You Buy?.
NAS Drive Compatibility: The Bottom Line
Never buy NAS drives from the family name alone. Check the full manufacturer model number against the exact NAS model.
Synology DSM 7.3 has restored more third-party SATA flexibility on 2025 desktop Plus systems. But do not assume the same freedom applies to current M.2 storage pools or enterprise Synology families.
UGREEN offers the most openly third-party-focused ecosystem. Its NASync products support major HDD and SSD brands, but UGREEN still recommends checking the official compatibility list because an unlisted drive has not been validated for stability/performance.
QNAP supports a huge variety of third-party drives but takes its testing database seriously. QNAP explicitly says technical support may be unavailable for devices outside the compatibility list.
Finally, compatibility is only the first filter. After a drive passes the compatibility check, compare CMR/SMR technology, workload rating, noise, power, endurance, warranty and current price. The cheapest drive is not cheap if the NAS refuses the feature you bought it for.
Continue the NAS Hardware Series
- Synology vs QNAP vs UGREEN vs TerraMaster: Which NAS Should You Buy?
- WD Red Plus vs WD Red Pro vs Seagate IronWolf for Home NAS
- Best NVMe SSDs for NAS Cache and Containers
Datasheets & External Resources
- Synology – Current DSM 7.3 drive-compatibility policies
- Synology – Products Compatibility List
- Synology – Current M.2 SSD storage-pool support
- Synology DS925+ – Current M.2 storage-pool compatibility notes
- UGREEN NASync – Current third-party drive ecosystem and compatibility
- UGREEN – Current drive-selection and exact-model compatibility guidance
- QNAP – Current Compatibility List
- QNAP – How drive compatibility is tested and verified