Intel N100 vs N150 vs N305 for Home Assistant
Intel N100 vs N150 vs N305 for Home Assistant: compare cores, power, local voice, virtualisation and mini PC value before choosing your processor.
Home Assistant Hardware Compared: Green vs Raspberry Pi 5 vs Mini PC vs NAS
Compare Home Assistant Green, Raspberry Pi 5, Intel N100/N150 mini PCs and NAS hardware for performance, storage, power use, reliability and expansion.
HC-SR04 vs JSN-SR04T: Best Ultrasonic Sensor for Water Tanks
VL53L0X vs VL53L1X: Best Time-of-Flight Sensor for ESP32
Compare VL53L0X vs VL53L1X for ESP32 projects. Range, field of view, speed, ESPHome support, wiring, multi-sensor use and which ToF sensor to choose.
ESP32 Sump-Pump and Flood Monitor with Home Assistant
Build an ESP32 sump-pump and flood monitor with ESPHome and Home Assistant. Track pump runtime, high water, leaks, power loss and failure conditions.
OpenTherm Gateway with ESP32 and Home Assistant
Build an ESP32 OpenTherm controller or inline gateway for Home Assistant. Monitor boiler modulation, temperatures, faults and control heating setpoints safely.
ESP32 Multi-Zone Heating Controller with ESPHome and Home Assistant
Build an ESP32 multi-zone heating controller with ESPHome and Home Assistant. Control room thermostats, zone valves and shared boiler demand safely.
Matter over Thread with ESP32-C6 and Home Assistant: Setup Guide
Build a Matter-over-Thread device with ESP32-C6 and Home Assistant. Covers Thread Border Routers, BLE commissioning, Arduino Matter, IPv6 and troubleshooting.
ESP32 Relay Boot Glitches: Active-Low Inputs, Pull Resistors and Safe Startup
Stop ESP32 relays clicking during boot and reset. Active-low inputs, restore_mode, pull resistors, strapping pins, power issues and safe ESPHome startup.