A reed switch is one of the simplest and most reliable ways to detect when a door or window opens. When combined with an ESP32, it becomes a fast, local, battery-free, and cloud-free door sensor that integrates perfectly with Home…
Monitoring indoor CO₂ levels is one of the most effective ways to track air quality, improve ventilation, and maintain a healthy indoor environment.The SCD30 and SCD41 are two of the best consumer-grade CO₂ sensors, offering accurate measurements and excellent long-term…
Build an ESP32 Bluetooth proxy for Home Assistant with ESPHome. Includes YAML, recommended boards, placement, scanning modes, active connections and fixes.
Passive Infrared (PIR) motion sensors are one of the simplest and most effective ways to detect motion in a room. Combined with an ESP32, they provide extremely fast, local, cloud-free motion detection that integrates perfectly with Home Assistant. This guide…
DS18B20 digital temperature probe lets you precisely measure temperatures in wet environments with a simple 1-Wire interface. The DS18B20 provides 9 to 12-bit (configurable) temperature readings over a 1-Wire interface, so that only one wire (and ground) needs to be…
The SHT45 is currently one of the most accurate temperature and humidity sensors available.It offers laboratory-grade precision, ultra-low power consumption, and very stable measurements. This guide shows you how to connect an ESP32 + SHT45 to Home Assistant using two…
Real-time energy monitoring is one of the most valuable additions to a smart home. The PZEM-004T module provides accurate measurements of: When combined with an ESP32, it offers a powerful, inexpensive way to send energy data directly into Home Assistant.…
The BME280 is one of the easiest sensors to integrate into Home Assistant for live temperature, humidity, and pressure monitoring. In this guide, we show you how to install the sensor, flash the ESP32, configure MQTT, and view the readings…
Send Sensor Data With Zero Assumptions • Exact Steps • Fully Reliable This guide shows exactly how to send readings (e.g., BME280 temperature/humidity/pressure) from your ESP32 to Home Assistant using MQTT. Everything is simple, direct, and tested. 1. What You…