This guide shows how to connect a PMS5003 (PM2.5/PM10) particulate sensor to an ESP32 using UART, configure it in ESPHome, and display air-quality values in Home Assistant (optional MQTT). Includes wiring, safe GPIO choices, recommended update intervals, warm-up/duty cycling tips,…
Quick SummaryThis guide shows how to connect an INA219 or INA226 current/voltage sensor to an ESP32 over I²C, configure it in ESPHome, and monitor battery/solar voltage, current, power and energy in Home Assistant (optional MQTT). Includes wiring, address scanning, calibration…
This guide shows how to wire a DHT22/AM2302 to an ESP32, set it up in ESPHome, and get temperature + humidity into Home Assistant (with optional MQTT). It includes the correct pull-up resistor, safe GPIO choices, recommended update intervals, and…
Compare ESP32-C6 DevKitC, DevKitM, WROOM, MINI, XIAO and compact boards. Choose the right C6 for Matter, Thread, Zigbee, ESPHome and prototyping.
Compare ESP32-C3 chips, modules and boards including DevKitC-02, DevKitM-1, XIAO, SuperMini and LOLIN C3 mini, with clear buying advice.
If you’re looking for the true modern successor to the legendary ESP8266, this is it. While the ESP32 family has expanded into multi-core, AI-friendly, Matter-ready chips, the ESP32-C2 was built for one mission: the cheapest, most power-efficient, high-volume Wi-Fi IoT.…
ESP32 C2 vs C3 vs C5 vs C6 vs C61 compared: Wi-Fi bands, BLE, Thread, Zigbee, speed and the best chip for ESPHome, Matter and everyday IoT.
This guide compares the ecosystem and helps you pick the right S2 option quickly, using Espressif’s official docs. ESP32-S2 is the “USB + Wi-Fi” ESP32: single-core, Wi-Fi only (no Bluetooth), and designed for USB devices, low-cost IoT, and HMI-style projects…
If you’re reading esp32.co.uk, you probably already have Home Assistant packed with ESPHome sensors, smart relays, and automations that look like a small engineering project. But let’s be totally candid: a smart home is useless if it takes 15 seconds…
If you’re reading esp32.co.uk, you probably already have Home Assistant stuffed with ESPHome sensors, smart relays, and automations that look like a small PhD thesis. But none of that matters if turning a light on takes 10–15 seconds of app-fumbling.…