ESP32 Multi-Zone Heating Controller with ESPHome and Home Assistant
Build an ESP32 multi-zone heating controller with ESPHome and Home Assistant. Control room thermostats, zone valves and shared boiler demand safely.
Build an ESP32 multi-zone heating controller with ESPHome and Home Assistant. Control room thermostats, zone valves and shared boiler demand safely.
Quick summary: The PZEM-016 measures single-phase AC voltage, current, active power, frequency, power factor and accumulated energy. Its external current transformer (CT) goes around one conductor; its mains measurement terminals sense the circuit voltage; and its RS485 port sends the…
Connect an MH-Z19B CO2 sensor to ESP32 and ESPHome via 9600-baud UART. Covers safe 5 V wiring, warm-up, automatic baseline calibration, manual zero calibration, Home Assistant ventilation and troubleshooting.
Build an ESP32 tipping-bucket rain gauge with ESPHome and Home Assistant: reed-switch wiring, debouncing, millimetres-per-tip calibration, daily rainfall, rain rate and reboot-safe totals.
Fix ESPHome OTA update failures: IP and port troubleshooting, 2026.9 encrypted OTA migration, boot loops, Safe Mode, rollback, partition errors and ESP32 USB reflashing.
M5Stack AtomS3 Lite pinout and setup guide covering GPIOs, RGB LED, button, IR transmitter, Grove port, Arduino IDE, ESPHome, upload recovery and practical Home Assistant projects.
Connect an AHT20 temperature and humidity sensor to ESP32 and ESPHome. Covers 0x38 wiring, AHT20 variant setup, calibration offsets, filtering, self-heating, placement, condensation and Home Assistant.